Methods for Maintenance and Construction of Square Music Fountain

The maintenance and upkeep of square fountains are not simple daily care. It is necessary to strengthen the awareness of square fountain maintenance and upkeep. If the nozzle is tilted, blocked, or damaged, it needs to be repaired in a timely manner. The float needs to be salvaged, and if the water quality on the surface changes poorly, it needs to be replaced or processed. The fountain control room needs to be cleaned without moisture maintenance. To ensure the design, construction, installation, acceptance, operation, maintenance, and management of fountain water feature projects are advanced in technology, safe, economical, and reasonable in engineering quality, and to standardize water springs. The specifications for square fountains apply to the design, construction, installation, acceptance, operation, maintenance, and management of urban, public, residential, and indoor/outdoor fountain water feature projects The quantity proportional to the size of the fountain of negative ions. The average measurement value for large fountains is 10000 to 20000, while for small fountains it is only about 3000 to 4000. The negative ion content in the air is related to the distance between the fountains. Wind has a significant impact on negative ions in the air. 
When the negative ions in the air significantly increase in the wind, the wind direction or side wind is very low, sometimes even close to not opening, the value of the fountain. When there is silk water every day, the top is the negative ion content in the air. Fountain water landscape engineering should consider the conservation and comprehensive utilization of water resources, as well as the improvement of local microclimate. Proper treatment of water landscapes and the use of water, green water, industrial water, and water in urban life should be carried out. Attention should be paid to the cool relationship between fountains, fresh air, increased air humidity, and increased negative ion content in the air. When the fountain is opened, the temperature and humidity of the environment will also be affected. The temperature will open around the fountain, ranging from 3 to 5 ℃, and more in hot summer and autumn, reaching up to 6 to 7 ℃ The increase in humidity is significant, about 20% to 20%, and interestingly, there is also a clear correlation between temperature and humidity. 
The source of this effect is of great significance for improving the quality of environmental life. Fountain water feature engineering should be included in urban design, public buildings, residential areas, landscape architecture and other architectural planning, and have overall planning and environmental characteristics, architectural forms, spatial and physical structures. What is the relationship between air negative ions and time? Research has found that there is no difference in the amount of anions in fountains in the morning, afternoon, and evening, so approaching the fountain at any time in the middle will have the same effect. From a seasonal perspective, there are fewer negative ions in the air in July. You should watch and enjoy the fountain at the right time. Submersible oil pumps and their control systems should undergo comprehensive maintenance on a regular basis, at least once a year, for comprehensive preventive maintenance, 
The content includes: abnormal vibration noise and voltage and current when the phone is connected, the starting device works normally, whether there is overheating leakage alarm, setting multiple protections to frequently operate, aging cracks in the main cable and control cable, no glue dead oxidation or burrs in the main contactor, correct setting of the thermal relay, whether there are signs of aging in the winding insulation, low grounding insulation resistance, balanced three-phase winding resistance, whether there are chambers or scratches in the stator and rotor, accurate liquid level control system, normal and reliable up and down output, reliable floating ball movement, aging and misoperation of temperature detection components, any emulsification of oil, good mechanical seal conditions, bearing wear, impeller wear or no cavitation, whether it is rust or wear of axial deformation, motor, loose internal and external fastening screws, and cooling circulating water pipes. clutter, Whether there is precipitation or blockage around the pump.